Back to index...

	/*
	* Copyright (c) 2012, 2015, Oracle and/or its affiliates. All rights reserved.
	* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
	*
	* This code is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License version 2 only, as
	* published by the Free Software Foundation. Oracle designates this
	* particular file as subject to the "Classpath" exception as provided
	* by Oracle in the LICENSE file that accompanied this code.
	*
	* This code is distributed in the hope that it will be useful, but WITHOUT
	* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
	* version 2 for more details (a copy is included in the LICENSE file that
	* accompanied this code).
	*
	* You should have received a copy of the GNU General Public License version
	* 2 along with this work; if not, write to the Free Software Foundation,
	* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
	*
	* Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
	* or visit www.oracle.com if you need additional information or have any
	* questions.
	*/

	/*
	* This file is available under and governed by the GNU General Public
	* License version 2 only, as published by the Free Software Foundation.
	* However, the following notice accompanied the original version of this
	* file:
	*
	* Copyright (c) 2007-2012, Stephen Colebourne & Michael Nascimento Santos
	*
	* All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	*
	* * Redistributions of source code must retain the above copyright notice,
	* this list of conditions and the following disclaimer.
	*
	* * Redistributions in binary form must reproduce the above copyright notice,
	* this list of conditions and the following disclaimer in the documentation
	* and/or other materials provided with the distribution.
	*
	* * Neither the name of JSR-310 nor the names of its contributors
	* may be used to endorse or promote products derived from this software
	* without specific prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
	* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
	* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
	* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
	* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
	* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
	* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
	* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*/
	package java.time;

	import static java.time.temporal.ChronoField.EPOCH_DAY;
	import static java.time.temporal.ChronoField.INSTANT_SECONDS;
	import static java.time.temporal.ChronoField.NANO_OF_DAY;
	import static java.time.temporal.ChronoField.OFFSET_SECONDS;
	import static java.time.temporal.ChronoUnit.FOREVER;
	import static java.time.temporal.ChronoUnit.NANOS;

	import java.io.IOException;
	import java.io.ObjectInput;
	import java.io.ObjectOutput;
	import java.io.InvalidObjectException;
	import java.io.ObjectInputStream;
	import java.io.Serializable;
	import java.time.chrono.IsoChronology;
	import java.time.format.DateTimeFormatter;
	import java.time.format.DateTimeParseException;
	import java.time.temporal.ChronoField;
	import java.time.temporal.ChronoUnit;
	import java.time.temporal.Temporal;
	import java.time.temporal.TemporalAccessor;
	import java.time.temporal.TemporalAdjuster;
	import java.time.temporal.TemporalAmount;
	import java.time.temporal.TemporalField;
	import java.time.temporal.TemporalQueries;
	import java.time.temporal.TemporalQuery;
	import java.time.temporal.TemporalUnit;
	import java.time.temporal.UnsupportedTemporalTypeException;
	import java.time.temporal.ValueRange;
	import java.time.zone.ZoneRules;
	import java.util.Comparator;
	import java.util.Objects;

	/**
	* A date-time with an offset from UTC/Greenwich in the ISO-8601 calendar system,
	* such as {@code 2007-12-03T10:15:30+01:00}.
	* <p>
	* {@code OffsetDateTime} is an immutable representation of a date-time with an offset.
	* This class stores all date and time fields, to a precision of nanoseconds,
	* as well as the offset from UTC/Greenwich. For example, the value
	* "2nd October 2007 at 13:45.30.123456789 +02:00" can be stored in an {@code OffsetDateTime}.
	* <p>
	* {@code OffsetDateTime}, {@link java.time.ZonedDateTime} and {@link java.time.Instant} all store an instant
	* on the time-line to nanosecond precision.
	* {@code Instant} is the simplest, simply representing the instant.
	* {@code OffsetDateTime} adds to the instant the offset from UTC/Greenwich, which allows
	* the local date-time to be obtained.
	* {@code ZonedDateTime} adds full time-zone rules.
	* <p>
	* It is intended that {@code ZonedDateTime} or {@code Instant} is used to model data
	* in simpler applications. This class may be used when modeling date-time concepts in
	* more detail, or when communicating to a database or in a network protocol.
	*
	* <p>
	* This is a <a href="{@docRoot}/java/lang/doc-files/ValueBased.html">value-based</a>
	* class; use of identity-sensitive operations (including reference equality
	* ({@code ==}), identity hash code, or synchronization) on instances of
	* {@code OffsetDateTime} may have unpredictable results and should be avoided.
	* The {@code equals} method should be used for comparisons.
	*
	* @implSpec
	* This class is immutable and thread-safe.
	*
	* @since 1.8
	*/
	public final class OffsetDateTime
	implements Temporal, TemporalAdjuster, Comparable<OffsetDateTime>, Serializable {

	/**
	* The minimum supported {@code OffsetDateTime}, '-999999999-01-01T00:00:00+18:00'.
	* This is the local date-time of midnight at the start of the minimum date
	* in the maximum offset (larger offsets are earlier on the time-line).
	* This combines {@link LocalDateTime#MIN} and {@link ZoneOffset#MAX}.
	* This could be used by an application as a "far past" date-time.
	*/
	public static final OffsetDateTime MIN = LocalDateTime.MIN.atOffset(ZoneOffset.MAX);
	/**
	* The maximum supported {@code OffsetDateTime}, '+999999999-12-31T23:59:59.999999999-18:00'.
	* This is the local date-time just before midnight at the end of the maximum date
	* in the minimum offset (larger negative offsets are later on the time-line).
	* This combines {@link LocalDateTime#MAX} and {@link ZoneOffset#MIN}.
	* This could be used by an application as a "far future" date-time.
	*/
	public static final OffsetDateTime MAX = LocalDateTime.MAX.atOffset(ZoneOffset.MIN);

	/**
	* Gets a comparator that compares two {@code OffsetDateTime} instances
	* based solely on the instant.
	* <p>
	* This method differs from the comparison in {@link #compareTo} in that it
	* only compares the underlying instant.
	*
	* @return a comparator that compares in time-line order
	*
	* @see #isAfter
	* @see #isBefore
	* @see #isEqual
	*/
	public static Comparator<OffsetDateTime> timeLineOrder() {
	return OffsetDateTime::compareInstant;
	}

	/**
	* Compares this {@code OffsetDateTime} to another date-time.
	* The comparison is based on the instant.
	*
	* @param datetime1 the first date-time to compare, not null
	* @param datetime2 the other date-time to compare to, not null
	* @return the comparator value, negative if less, positive if greater
	*/
	private static int compareInstant(OffsetDateTime datetime1, OffsetDateTime datetime2) {
	if (datetime1.getOffset().equals(datetime2.getOffset())) {
	return datetime1.toLocalDateTime().compareTo(datetime2.toLocalDateTime());
	}
	int cmp = Long.compare(datetime1.toEpochSecond(), datetime2.toEpochSecond());
	if (cmp == 0) {
	cmp = datetime1.toLocalTime().getNano() - datetime2.toLocalTime().getNano();
	}
	return cmp;
	}

	/**
	* Serialization version.
	*/
	private static final long serialVersionUID = 2287754244819255394L;

	/**
	* The local date-time.
	*/
	private final LocalDateTime dateTime;
	/**
	* The offset from UTC/Greenwich.
	*/
	private final ZoneOffset offset;

	//-----------------------------------------------------------------------
	/**
	* Obtains the current date-time from the system clock in the default time-zone.
	* <p>
	* This will query the {@link Clock#systemDefaultZone() system clock} in the default
	* time-zone to obtain the current date-time.
	* The offset will be calculated from the time-zone in the clock.
	* <p>
	* Using this method will prevent the ability to use an alternate clock for testing
	* because the clock is hard-coded.
	*
	* @return the current date-time using the system clock, not null
	*/
	public static OffsetDateTime now() {
	return now(Clock.systemDefaultZone());
	}

	/**
	* Obtains the current date-time from the system clock in the specified time-zone.
	* <p>
	* This will query the {@link Clock#system(ZoneId) system clock} to obtain the current date-time.
	* Specifying the time-zone avoids dependence on the default time-zone.
	* The offset will be calculated from the specified time-zone.
	* <p>
	* Using this method will prevent the ability to use an alternate clock for testing
	* because the clock is hard-coded.
	*
	* @param zone the zone ID to use, not null
	* @return the current date-time using the system clock, not null
	*/
	public static OffsetDateTime now(ZoneId zone) {
	return now(Clock.system(zone));
	}

	/**
	* Obtains the current date-time from the specified clock.
	* <p>
	* This will query the specified clock to obtain the current date-time.
	* The offset will be calculated from the time-zone in the clock.
	* <p>
	* Using this method allows the use of an alternate clock for testing.
	* The alternate clock may be introduced using {@link Clock dependency injection}.
	*
	* @param clock the clock to use, not null
	* @return the current date-time, not null
	*/
	public static OffsetDateTime now(Clock clock) {
	Objects.requireNonNull(clock, "clock");
	final Instant now = clock.instant(); // called once
	return ofInstant(now, clock.getZone().getRules().getOffset(now));
	}

	//-----------------------------------------------------------------------
	/**
	* Obtains an instance of {@code OffsetDateTime} from a date, time and offset.
	* <p>
	* This creates an offset date-time with the specified local date, time and offset.
	*
	* @param date the local date, not null
	* @param time the local time, not null
	* @param offset the zone offset, not null
	* @return the offset date-time, not null
	*/
	public static OffsetDateTime of(LocalDate date, LocalTime time, ZoneOffset offset) {
	LocalDateTime dt = LocalDateTime.of(date, time);
	return new OffsetDateTime(dt, offset);
	}

	/**
	* Obtains an instance of {@code OffsetDateTime} from a date-time and offset.
	* <p>
	* This creates an offset date-time with the specified local date-time and offset.
	*
	* @param dateTime the local date-time, not null
	* @param offset the zone offset, not null
	* @return the offset date-time, not null
	*/
	public static OffsetDateTime of(LocalDateTime dateTime, ZoneOffset offset) {
	return new OffsetDateTime(dateTime, offset);
	}

	/**
	* Obtains an instance of {@code OffsetDateTime} from a year, month, day,
	* hour, minute, second, nanosecond and offset.
	* <p>
	* This creates an offset date-time with the seven specified fields.
	* <p>
	* This method exists primarily for writing test cases.
	* Non test-code will typically use other methods to create an offset time.
	* {@code LocalDateTime} has five additional convenience variants of the
	* equivalent factory method taking fewer arguments.
	* They are not provided here to reduce the footprint of the API.
	*
	* @param year the year to represent, from MIN_YEAR to MAX_YEAR
	* @param month the month-of-year to represent, from 1 (January) to 12 (December)
	* @param dayOfMonth the day-of-month to represent, from 1 to 31
	* @param hour the hour-of-day to represent, from 0 to 23
	* @param minute the minute-of-hour to represent, from 0 to 59
	* @param second the second-of-minute to represent, from 0 to 59
	* @param nanoOfSecond the nano-of-second to represent, from 0 to 999,999,999
	* @param offset the zone offset, not null
	* @return the offset date-time, not null
	* @throws DateTimeException if the value of any field is out of range, or
	* if the day-of-month is invalid for the month-year
	*/
	public static OffsetDateTime of(
	int year, int month, int dayOfMonth,
	int hour, int minute, int second, int nanoOfSecond, ZoneOffset offset) {
	LocalDateTime dt = LocalDateTime.of(year, month, dayOfMonth, hour, minute, second, nanoOfSecond);
	return new OffsetDateTime(dt, offset);
	}

	//-----------------------------------------------------------------------
	/**
	* Obtains an instance of {@code OffsetDateTime} from an {@code Instant} and zone ID.
	* <p>
	* This creates an offset date-time with the same instant as that specified.
	* Finding the offset from UTC/Greenwich is simple as there is only one valid
	* offset for each instant.
	*
	* @param instant the instant to create the date-time from, not null
	* @param zone the time-zone, which may be an offset, not null
	* @return the offset date-time, not null
	* @throws DateTimeException if the result exceeds the supported range
	*/
	public static OffsetDateTime ofInstant(Instant instant, ZoneId zone) {
	Objects.requireNonNull(instant, "instant");
	Objects.requireNonNull(zone, "zone");
	ZoneRules rules = zone.getRules();
	ZoneOffset offset = rules.getOffset(instant);
	LocalDateTime ldt = LocalDateTime.ofEpochSecond(instant.getEpochSecond(), instant.getNano(), offset);
	return new OffsetDateTime(ldt, offset);
	}

	//-----------------------------------------------------------------------
	/**
	* Obtains an instance of {@code OffsetDateTime} from a temporal object.
	* <p>
	* This obtains an offset date-time based on the specified temporal.
	* A {@code TemporalAccessor} represents an arbitrary set of date and time information,
	* which this factory converts to an instance of {@code OffsetDateTime}.
	* <p>
	* The conversion will first obtain a {@code ZoneOffset} from the temporal object.
	* It will then try to obtain a {@code LocalDateTime}, falling back to an {@code Instant} if necessary.
	* The result will be the combination of {@code ZoneOffset} with either
	* with {@code LocalDateTime} or {@code Instant}.
	* Implementations are permitted to perform optimizations such as accessing
	* those fields that are equivalent to the relevant objects.
	* <p>
	* This method matches the signature of the functional interface {@link TemporalQuery}
	* allowing it to be used as a query via method reference, {@code OffsetDateTime::from}.
	*
	* @param temporal the temporal object to convert, not null
	* @return the offset date-time, not null
	* @throws DateTimeException if unable to convert to an {@code OffsetDateTime}
	*/
	public static OffsetDateTime from(TemporalAccessor temporal) {
	if (temporal instanceof OffsetDateTime) {
	return (OffsetDateTime) temporal;
	}
	try {
	ZoneOffset offset = ZoneOffset.from(temporal);
	LocalDate date = temporal.query(TemporalQueries.localDate());
	LocalTime time = temporal.query(TemporalQueries.localTime());
	if (date != null && time != null) {
	return OffsetDateTime.of(date, time, offset);
	} else {
	Instant instant = Instant.from(temporal);
	return OffsetDateTime.ofInstant(instant, offset);
	}
	} catch (DateTimeException ex) {
	throw new DateTimeException("Unable to obtain OffsetDateTime from TemporalAccessor: " +
	temporal + " of type " + temporal.getClass().getName(), ex);
	}
	}

	//-----------------------------------------------------------------------
	/**
	* Obtains an instance of {@code OffsetDateTime} from a text string
	* such as {@code 2007-12-03T10:15:30+01:00}.
	* <p>
	* The string must represent a valid date-time and is parsed using
	* {@link java.time.format.DateTimeFormatter#ISO_OFFSET_DATE_TIME}.
	*
	* @param text the text to parse such as "2007-12-03T10:15:30+01:00", not null
	* @return the parsed offset date-time, not null
	* @throws DateTimeParseException if the text cannot be parsed
	*/
	public static OffsetDateTime parse(CharSequence text) {
	return parse(text, DateTimeFormatter.ISO_OFFSET_DATE_TIME);
	}

	/**
	* Obtains an instance of {@code OffsetDateTime} from a text string using a specific formatter.
	* <p>
	* The text is parsed using the formatter, returning a date-time.
	*
	* @param text the text to parse, not null
	* @param formatter the formatter to use, not null
	* @return the parsed offset date-time, not null
	* @throws DateTimeParseException if the text cannot be parsed
	*/
	public static OffsetDateTime parse(CharSequence text, DateTimeFormatter formatter) {
	Objects.requireNonNull(formatter, "formatter");
	return formatter.parse(text, OffsetDateTime::from);
	}

	//-----------------------------------------------------------------------
	/**
	* Constructor.
	*
	* @param dateTime the local date-time, not null
	* @param offset the zone offset, not null
	*/
	private OffsetDateTime(LocalDateTime dateTime, ZoneOffset offset) {
	this.dateTime = Objects.requireNonNull(dateTime, "dateTime");
	this.offset = Objects.requireNonNull(offset, "offset");
	}

	/**
	* Returns a new date-time based on this one, returning {@code this} where possible.
	*
	* @param dateTime the date-time to create with, not null
	* @param offset the zone offset to create with, not null
	*/
	private OffsetDateTime with(LocalDateTime dateTime, ZoneOffset offset) {
	if (this.dateTime == dateTime && this.offset.equals(offset)) {
	return this;
	}
	return new OffsetDateTime(dateTime, offset);
	}

	//-----------------------------------------------------------------------
	/**
	* Checks if the specified field is supported.
	* <p>
	* This checks if this date-time can be queried for the specified field.
	* If false, then calling the {@link #range(TemporalField) range},
	* {@link #get(TemporalField) get} and {@link #with(TemporalField, long)}
	* methods will throw an exception.
	* <p>
	* If the field is a {@link ChronoField} then the query is implemented here.
	* The supported fields are:
	* <ul>
	* <li>{@code NANO_OF_SECOND}
	* <li>{@code NANO_OF_DAY}
	* <li>{@code MICRO_OF_SECOND}
	* <li>{@code MICRO_OF_DAY}
	* <li>{@code MILLI_OF_SECOND}
	* <li>{@code MILLI_OF_DAY}
	* <li>{@code SECOND_OF_MINUTE}
	* <li>{@code SECOND_OF_DAY}
	* <li>{@code MINUTE_OF_HOUR}
	* <li>{@code MINUTE_OF_DAY}
	* <li>{@code HOUR_OF_AMPM}
	* <li>{@code CLOCK_HOUR_OF_AMPM}
	* <li>{@code HOUR_OF_DAY}
	* <li>{@code CLOCK_HOUR_OF_DAY}
	* <li>{@code AMPM_OF_DAY}
	* <li>{@code DAY_OF_WEEK}
	* <li>{@code ALIGNED_DAY_OF_WEEK_IN_MONTH}
	* <li>{@code ALIGNED_DAY_OF_WEEK_IN_YEAR}
	* <li>{@code DAY_OF_MONTH}
	* <li>{@code DAY_OF_YEAR}
	* <li>{@code EPOCH_DAY}
	* <li>{@code ALIGNED_WEEK_OF_MONTH}
	* <li>{@code ALIGNED_WEEK_OF_YEAR}
	* <li>{@code MONTH_OF_YEAR}
	* <li>{@code PROLEPTIC_MONTH}
	* <li>{@code YEAR_OF_ERA}
	* <li>{@code YEAR}
	* <li>{@code ERA}
	* <li>{@code INSTANT_SECONDS}
	* <li>{@code OFFSET_SECONDS}
	* </ul>
	* All other {@code ChronoField} instances will return false.
	* <p>
	* If the field is not a {@code ChronoField}, then the result of this method
	* is obtained by invoking {@code TemporalField.isSupportedBy(TemporalAccessor)}
	* passing {@code this} as the argument.
	* Whether the field is supported is determined by the field.
	*
	* @param field the field to check, null returns false
	* @return true if the field is supported on this date-time, false if not
	*/
	@Override
	public boolean isSupported(TemporalField field) {
	return field instanceof ChronoField \|\| (field != null && field.isSupportedBy(this));
	}

	/**
	* Checks if the specified unit is supported.
	* <p>
	* This checks if the specified unit can be added to, or subtracted from, this date-time.
	* If false, then calling the {@link #plus(long, TemporalUnit)} and
	* {@link #minus(long, TemporalUnit) minus} methods will throw an exception.
	* <p>
	* If the unit is a {@link ChronoUnit} then the query is implemented here.
	* The supported units are:
	* <ul>
	* <li>{@code NANOS}
	* <li>{@code MICROS}
	* <li>{@code MILLIS}
	* <li>{@code SECONDS}
	* <li>{@code MINUTES}
	* <li>{@code HOURS}
	* <li>{@code HALF_DAYS}
	* <li>{@code DAYS}
	* <li>{@code WEEKS}
	* <li>{@code MONTHS}
	* <li>{@code YEARS}
	* <li>{@code DECADES}
	* <li>{@code CENTURIES}
	* <li>{@code MILLENNIA}
	* <li>{@code ERAS}
	* </ul>
	* All other {@code ChronoUnit} instances will return false.
	* <p>
	* If the unit is not a {@code ChronoUnit}, then the result of this method
	* is obtained by invoking {@code TemporalUnit.isSupportedBy(Temporal)}
	* passing {@code this} as the argument.
	* Whether the unit is supported is determined by the unit.
	*
	* @param unit the unit to check, null returns false
	* @return true if the unit can be added/subtracted, false if not
	*/
	@Override // override for Javadoc
	public boolean isSupported(TemporalUnit unit) {
	if (unit instanceof ChronoUnit) {
	return unit != FOREVER;
	}
	return unit != null && unit.isSupportedBy(this);
	}

	//-----------------------------------------------------------------------
	/**
	* Gets the range of valid values for the specified field.
	* <p>
	* The range object expresses the minimum and maximum valid values for a field.
	* This date-time is used to enhance the accuracy of the returned range.
	* If it is not possible to return the range, because the field is not supported
	* or for some other reason, an exception is thrown.
	* <p>
	* If the field is a {@link ChronoField} then the query is implemented here.
	* The {@link #isSupported(TemporalField) supported fields} will return
	* appropriate range instances.
	* All other {@code ChronoField} instances will throw an {@code UnsupportedTemporalTypeException}.
	* <p>
	* If the field is not a {@code ChronoField}, then the result of this method
	* is obtained by invoking {@code TemporalField.rangeRefinedBy(TemporalAccessor)}
	* passing {@code this} as the argument.
	* Whether the range can be obtained is determined by the field.
	*
	* @param field the field to query the range for, not null
	* @return the range of valid values for the field, not null
	* @throws DateTimeException if the range for the field cannot be obtained
	* @throws UnsupportedTemporalTypeException if the field is not supported
	*/
	@Override
	public ValueRange range(TemporalField field) {
	if (field instanceof ChronoField) {
	if (field == INSTANT_SECONDS \|\| field == OFFSET_SECONDS) {
	return field.range();
	}
	return dateTime.range(field);
	}
	return field.rangeRefinedBy(this);
	}

	/**
	* Gets the value of the specified field from this date-time as an {@code int}.
	* <p>
	* This queries this date-time for the value of the specified field.
	* The returned value will always be within the valid range of values for the field.
	* If it is not possible to return the value, because the field is not supported
	* or for some other reason, an exception is thrown.
	* <p>
	* If the field is a {@link ChronoField} then the query is implemented here.
	* The {@link #isSupported(TemporalField) supported fields} will return valid
	* values based on this date-time, except {@code NANO_OF_DAY}, {@code MICRO_OF_DAY},
	* {@code EPOCH_DAY}, {@code PROLEPTIC_MONTH} and {@code INSTANT_SECONDS} which are too
	* large to fit in an {@code int} and throw a {@code DateTimeException}.
	* All other {@code ChronoField} instances will throw an {@code UnsupportedTemporalTypeException}.
	* <p>
	* If the field is not a {@code ChronoField}, then the result of this method
	* is obtained by invoking {@code TemporalField.getFrom(TemporalAccessor)}
	* passing {@code this} as the argument. Whether the value can be obtained,
	* and what the value represents, is determined by the field.
	*
	* @param field the field to get, not null
	* @return the value for the field
	* @throws DateTimeException if a value for the field cannot be obtained or
	* the value is outside the range of valid values for the field
	* @throws UnsupportedTemporalTypeException if the field is not supported or
	* the range of values exceeds an {@code int}
	* @throws ArithmeticException if numeric overflow occurs
	*/
	@Override
	public int get(TemporalField field) {
	if (field instanceof ChronoField) {
	switch ((ChronoField) field) {
	case INSTANT_SECONDS:
	throw new UnsupportedTemporalTypeException("Invalid field 'InstantSeconds' for get() method, use getLong() instead");
	case OFFSET_SECONDS:
	return getOffset().getTotalSeconds();
	}
	return dateTime.get(field);
	}
	return Temporal.super.get(field);
	}

	/**
	* Gets the value of the specified field from this date-time as a {@code long}.
	* <p>
	* This queries this date-time for the value of the specified field.
	* If it is not possible to return the value, because the field is not supported
	* or for some other reason, an exception is thrown.
	* <p>
	* If the field is a {@link ChronoField} then the query is implemented here.
	* The {@link #isSupported(TemporalField) supported fields} will return valid
	* values based on this date-time.
	* All other {@code ChronoField} instances will throw an {@code UnsupportedTemporalTypeException}.
	* <p>
	* If the field is not a {@code ChronoField}, then the result of this method
	* is obtained by invoking {@code TemporalField.getFrom(TemporalAccessor)}
	* passing {@code this} as the argument. Whether the value can be obtained,
	* and what the value represents, is determined by the field.
	*
	* @param field the field to get, not null
	* @return the value for the field
	* @throws DateTimeException if a value for the field cannot be obtained
	* @throws UnsupportedTemporalTypeException if the field is not supported
	* @throws ArithmeticException if numeric overflow occurs
	*/
	@Override
	public long getLong(TemporalField field) {
	if (field instanceof ChronoField) {
	switch ((ChronoField) field) {
	case INSTANT_SECONDS: return toEpochSecond();
	case OFFSET_SECONDS: return getOffset().getTotalSeconds();
	}
	return dateTime.getLong(field);
	}
	return field.getFrom(this);
	}

	//-----------------------------------------------------------------------
	/**
	* Gets the zone offset, such as '+01:00'.
	* <p>
	* This is the offset of the local date-time from UTC/Greenwich.
	*
	* @return the zone offset, not null
	*/
	public ZoneOffset getOffset() {
	return offset;
	}

	/**
	* Returns a copy of this {@code OffsetDateTime} with the specified offset ensuring
	* that the result has the same local date-time.
	* <p>
	* This method returns an object with the same {@code LocalDateTime} and the specified {@code ZoneOffset}.
	* No calculation is needed or performed.
	* For example, if this time represents {@code 2007-12-03T10:30+02:00} and the offset specified is
	* {@code +03:00}, then this method will return {@code 2007-12-03T10:30+03:00}.
	* <p>
	* To take into account the difference between the offsets, and adjust the time fields,
	* use {@link #withOffsetSameInstant}.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param offset the zone offset to change to, not null
	* @return an {@code OffsetDateTime} based on this date-time with the requested offset, not null
	*/
	public OffsetDateTime withOffsetSameLocal(ZoneOffset offset) {
	return with(dateTime, offset);
	}

	/**
	* Returns a copy of this {@code OffsetDateTime} with the specified offset ensuring
	* that the result is at the same instant.
	* <p>
	* This method returns an object with the specified {@code ZoneOffset} and a {@code LocalDateTime}
	* adjusted by the difference between the two offsets.
	* This will result in the old and new objects representing the same instant.
	* This is useful for finding the local time in a different offset.
	* For example, if this time represents {@code 2007-12-03T10:30+02:00} and the offset specified is
	* {@code +03:00}, then this method will return {@code 2007-12-03T11:30+03:00}.
	* <p>
	* To change the offset without adjusting the local time use {@link #withOffsetSameLocal}.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param offset the zone offset to change to, not null
	* @return an {@code OffsetDateTime} based on this date-time with the requested offset, not null
	* @throws DateTimeException if the result exceeds the supported date range
	*/
	public OffsetDateTime withOffsetSameInstant(ZoneOffset offset) {
	if (offset.equals(this.offset)) {
	return this;
	}
	int difference = offset.getTotalSeconds() - this.offset.getTotalSeconds();
	LocalDateTime adjusted = dateTime.plusSeconds(difference);
	return new OffsetDateTime(adjusted, offset);
	}

	//-----------------------------------------------------------------------
	/**
	* Gets the {@code LocalDateTime} part of this date-time.
	* <p>
	* This returns a {@code LocalDateTime} with the same year, month, day and time
	* as this date-time.
	*
	* @return the local date-time part of this date-time, not null
	*/
	public LocalDateTime toLocalDateTime() {
	return dateTime;
	}

	//-----------------------------------------------------------------------
	/**
	* Gets the {@code LocalDate} part of this date-time.
	* <p>
	* This returns a {@code LocalDate} with the same year, month and day
	* as this date-time.
	*
	* @return the date part of this date-time, not null
	*/
	public LocalDate toLocalDate() {
	return dateTime.toLocalDate();
	}

	/**
	* Gets the year field.
	* <p>
	* This method returns the primitive {@code int} value for the year.
	* <p>
	* The year returned by this method is proleptic as per {@code get(YEAR)}.
	* To obtain the year-of-era, use {@code get(YEAR_OF_ERA)}.
	*
	* @return the year, from MIN_YEAR to MAX_YEAR
	*/
	public int getYear() {
	return dateTime.getYear();
	}

	/**
	* Gets the month-of-year field from 1 to 12.
	* <p>
	* This method returns the month as an {@code int} from 1 to 12.
	* Application code is frequently clearer if the enum {@link Month}
	* is used by calling {@link #getMonth()}.
	*
	* @return the month-of-year, from 1 to 12
	* @see #getMonth()
	*/
	public int getMonthValue() {
	return dateTime.getMonthValue();
	}

	/**
	* Gets the month-of-year field using the {@code Month} enum.
	* <p>
	* This method returns the enum {@link Month} for the month.
	* This avoids confusion as to what {@code int} values mean.
	* If you need access to the primitive {@code int} value then the enum
	* provides the {@link Month#getValue() int value}.
	*
	* @return the month-of-year, not null
	* @see #getMonthValue()
	*/
	public Month getMonth() {
	return dateTime.getMonth();
	}

	/**
	* Gets the day-of-month field.
	* <p>
	* This method returns the primitive {@code int} value for the day-of-month.
	*
	* @return the day-of-month, from 1 to 31
	*/
	public int getDayOfMonth() {
	return dateTime.getDayOfMonth();
	}

	/**
	* Gets the day-of-year field.
	* <p>
	* This method returns the primitive {@code int} value for the day-of-year.
	*
	* @return the day-of-year, from 1 to 365, or 366 in a leap year
	*/
	public int getDayOfYear() {
	return dateTime.getDayOfYear();
	}

	/**
	* Gets the day-of-week field, which is an enum {@code DayOfWeek}.
	* <p>
	* This method returns the enum {@link DayOfWeek} for the day-of-week.
	* This avoids confusion as to what {@code int} values mean.
	* If you need access to the primitive {@code int} value then the enum
	* provides the {@link DayOfWeek#getValue() int value}.
	* <p>
	* Additional information can be obtained from the {@code DayOfWeek}.
	* This includes textual names of the values.
	*
	* @return the day-of-week, not null
	*/
	public DayOfWeek getDayOfWeek() {
	return dateTime.getDayOfWeek();
	}

	//-----------------------------------------------------------------------
	/**
	* Gets the {@code LocalTime} part of this date-time.
	* <p>
	* This returns a {@code LocalTime} with the same hour, minute, second and
	* nanosecond as this date-time.
	*
	* @return the time part of this date-time, not null
	*/
	public LocalTime toLocalTime() {
	return dateTime.toLocalTime();
	}

	/**
	* Gets the hour-of-day field.
	*
	* @return the hour-of-day, from 0 to 23
	*/
	public int getHour() {
	return dateTime.getHour();
	}

	/**
	* Gets the minute-of-hour field.
	*
	* @return the minute-of-hour, from 0 to 59
	*/
	public int getMinute() {
	return dateTime.getMinute();
	}

	/**
	* Gets the second-of-minute field.
	*
	* @return the second-of-minute, from 0 to 59
	*/
	public int getSecond() {
	return dateTime.getSecond();
	}

	/**
	* Gets the nano-of-second field.
	*
	* @return the nano-of-second, from 0 to 999,999,999
	*/
	public int getNano() {
	return dateTime.getNano();
	}

	//-----------------------------------------------------------------------
	/**
	* Returns an adjusted copy of this date-time.
	* <p>
	* This returns an {@code OffsetDateTime}, based on this one, with the date-time adjusted.
	* The adjustment takes place using the specified adjuster strategy object.
	* Read the documentation of the adjuster to understand what adjustment will be made.
	* <p>
	* A simple adjuster might simply set the one of the fields, such as the year field.
	* A more complex adjuster might set the date to the last day of the month.
	* A selection of common adjustments is provided in
	* {@link java.time.temporal.TemporalAdjusters TemporalAdjusters}.
	* These include finding the "last day of the month" and "next Wednesday".
	* Key date-time classes also implement the {@code TemporalAdjuster} interface,
	* such as {@link Month} and {@link java.time.MonthDay MonthDay}.
	* The adjuster is responsible for handling special cases, such as the varying
	* lengths of month and leap years.
	* <p>
	* For example this code returns a date on the last day of July:
	* <pre>
	* import static java.time.Month.*;
	* import static java.time.temporal.TemporalAdjusters.*;
	*
	* result = offsetDateTime.with(JULY).with(lastDayOfMonth());
	* </pre>
	* <p>
	* The classes {@link LocalDate}, {@link LocalTime} and {@link ZoneOffset} implement
	* {@code TemporalAdjuster}, thus this method can be used to change the date, time or offset:
	* <pre>
	* result = offsetDateTime.with(date);
	* result = offsetDateTime.with(time);
	* result = offsetDateTime.with(offset);
	* </pre>
	* <p>
	* The result of this method is obtained by invoking the
	* {@link TemporalAdjuster#adjustInto(Temporal)} method on the
	* specified adjuster passing {@code this} as the argument.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param adjuster the adjuster to use, not null
	* @return an {@code OffsetDateTime} based on {@code this} with the adjustment made, not null
	* @throws DateTimeException if the adjustment cannot be made
	* @throws ArithmeticException if numeric overflow occurs
	*/
	@Override
	public OffsetDateTime with(TemporalAdjuster adjuster) {
	// optimizations
	if (adjuster instanceof LocalDate \|\| adjuster instanceof LocalTime \|\| adjuster instanceof LocalDateTime) {
	return with(dateTime.with(adjuster), offset);
	} else if (adjuster instanceof Instant) {
	return ofInstant((Instant) adjuster, offset);
	} else if (adjuster instanceof ZoneOffset) {
	return with(dateTime, (ZoneOffset) adjuster);
	} else if (adjuster instanceof OffsetDateTime) {
	return (OffsetDateTime) adjuster;
	}
	return (OffsetDateTime) adjuster.adjustInto(this);
	}

	/**
	* Returns a copy of this date-time with the specified field set to a new value.
	* <p>
	* This returns an {@code OffsetDateTime}, based on this one, with the value
	* for the specified field changed.
	* This can be used to change any supported field, such as the year, month or day-of-month.
	* If it is not possible to set the value, because the field is not supported or for
	* some other reason, an exception is thrown.
	* <p>
	* In some cases, changing the specified field can cause the resulting date-time to become invalid,
	* such as changing the month from 31st January to February would make the day-of-month invalid.
	* In cases like this, the field is responsible for resolving the date. Typically it will choose
	* the previous valid date, which would be the last valid day of February in this example.
	* <p>
	* If the field is a {@link ChronoField} then the adjustment is implemented here.
	* <p>
	* The {@code INSTANT_SECONDS} field will return a date-time with the specified instant.
	* The offset and nano-of-second are unchanged.
	* If the new instant value is outside the valid range then a {@code DateTimeException} will be thrown.
	* <p>
	* The {@code OFFSET_SECONDS} field will return a date-time with the specified offset.
	* The local date-time is unaltered. If the new offset value is outside the valid range
	* then a {@code DateTimeException} will be thrown.
	* <p>
	* The other {@link #isSupported(TemporalField) supported fields} will behave as per
	* the matching method on {@link LocalDateTime#with(TemporalField, long) LocalDateTime}.
	* In this case, the offset is not part of the calculation and will be unchanged.
	* <p>
	* All other {@code ChronoField} instances will throw an {@code UnsupportedTemporalTypeException}.
	* <p>
	* If the field is not a {@code ChronoField}, then the result of this method
	* is obtained by invoking {@code TemporalField.adjustInto(Temporal, long)}
	* passing {@code this} as the argument. In this case, the field determines
	* whether and how to adjust the instant.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param field the field to set in the result, not null
	* @param newValue the new value of the field in the result
	* @return an {@code OffsetDateTime} based on {@code this} with the specified field set, not null
	* @throws DateTimeException if the field cannot be set
	* @throws UnsupportedTemporalTypeException if the field is not supported
	* @throws ArithmeticException if numeric overflow occurs
	*/
	@Override
	public OffsetDateTime with(TemporalField field, long newValue) {
	if (field instanceof ChronoField) {
	ChronoField f = (ChronoField) field;
	switch (f) {
	case INSTANT_SECONDS: return ofInstant(Instant.ofEpochSecond(newValue, getNano()), offset);
	case OFFSET_SECONDS: {
	return with(dateTime, ZoneOffset.ofTotalSeconds(f.checkValidIntValue(newValue)));
	}
	}
	return with(dateTime.with(field, newValue), offset);
	}
	return field.adjustInto(this, newValue);
	}

	//-----------------------------------------------------------------------
	/**
	* Returns a copy of this {@code OffsetDateTime} with the year altered.
	* <p>
	* The time and offset do not affect the calculation and will be the same in the result.
	* If the day-of-month is invalid for the year, it will be changed to the last valid day of the month.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param year the year to set in the result, from MIN_YEAR to MAX_YEAR
	* @return an {@code OffsetDateTime} based on this date-time with the requested year, not null
	* @throws DateTimeException if the year value is invalid
	*/
	public OffsetDateTime withYear(int year) {
	return with(dateTime.withYear(year), offset);
	}

	/**
	* Returns a copy of this {@code OffsetDateTime} with the month-of-year altered.
	* <p>
	* The time and offset do not affect the calculation and will be the same in the result.
	* If the day-of-month is invalid for the year, it will be changed to the last valid day of the month.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param month the month-of-year to set in the result, from 1 (January) to 12 (December)
	* @return an {@code OffsetDateTime} based on this date-time with the requested month, not null
	* @throws DateTimeException if the month-of-year value is invalid
	*/
	public OffsetDateTime withMonth(int month) {
	return with(dateTime.withMonth(month), offset);
	}

	/**
	* Returns a copy of this {@code OffsetDateTime} with the day-of-month altered.
	* <p>
	* If the resulting {@code OffsetDateTime} is invalid, an exception is thrown.
	* The time and offset do not affect the calculation and will be the same in the result.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param dayOfMonth the day-of-month to set in the result, from 1 to 28-31
	* @return an {@code OffsetDateTime} based on this date-time with the requested day, not null
	* @throws DateTimeException if the day-of-month value is invalid,
	* or if the day-of-month is invalid for the month-year
	*/
	public OffsetDateTime withDayOfMonth(int dayOfMonth) {
	return with(dateTime.withDayOfMonth(dayOfMonth), offset);
	}

	/**
	* Returns a copy of this {@code OffsetDateTime} with the day-of-year altered.
	* <p>
	* The time and offset do not affect the calculation and will be the same in the result.
	* If the resulting {@code OffsetDateTime} is invalid, an exception is thrown.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param dayOfYear the day-of-year to set in the result, from 1 to 365-366
	* @return an {@code OffsetDateTime} based on this date with the requested day, not null
	* @throws DateTimeException if the day-of-year value is invalid,
	* or if the day-of-year is invalid for the year
	*/
	public OffsetDateTime withDayOfYear(int dayOfYear) {
	return with(dateTime.withDayOfYear(dayOfYear), offset);
	}

	//-----------------------------------------------------------------------
	/**
	* Returns a copy of this {@code OffsetDateTime} with the hour-of-day altered.
	* <p>
	* The date and offset do not affect the calculation and will be the same in the result.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param hour the hour-of-day to set in the result, from 0 to 23
	* @return an {@code OffsetDateTime} based on this date-time with the requested hour, not null
	* @throws DateTimeException if the hour value is invalid
	*/
	public OffsetDateTime withHour(int hour) {
	return with(dateTime.withHour(hour), offset);
	}

	/**
	* Returns a copy of this {@code OffsetDateTime} with the minute-of-hour altered.
	* <p>
	* The date and offset do not affect the calculation and will be the same in the result.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param minute the minute-of-hour to set in the result, from 0 to 59
	* @return an {@code OffsetDateTime} based on this date-time with the requested minute, not null
	* @throws DateTimeException if the minute value is invalid
	*/
	public OffsetDateTime withMinute(int minute) {
	return with(dateTime.withMinute(minute), offset);
	}

	/**
	* Returns a copy of this {@code OffsetDateTime} with the second-of-minute altered.
	* <p>
	* The date and offset do not affect the calculation and will be the same in the result.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param second the second-of-minute to set in the result, from 0 to 59
	* @return an {@code OffsetDateTime} based on this date-time with the requested second, not null
	* @throws DateTimeException if the second value is invalid
	*/
	public OffsetDateTime withSecond(int second) {
	return with(dateTime.withSecond(second), offset);
	}

	/**
	* Returns a copy of this {@code OffsetDateTime} with the nano-of-second altered.
	* <p>
	* The date and offset do not affect the calculation and will be the same in the result.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param nanoOfSecond the nano-of-second to set in the result, from 0 to 999,999,999
	* @return an {@code OffsetDateTime} based on this date-time with the requested nanosecond, not null
	* @throws DateTimeException if the nano value is invalid
	*/
	public OffsetDateTime withNano(int nanoOfSecond) {
	return with(dateTime.withNano(nanoOfSecond), offset);
	}

	//-----------------------------------------------------------------------
	/**
	* Returns a copy of this {@code OffsetDateTime} with the time truncated.
	* <p>
	* Truncation returns a copy of the original date-time with fields
	* smaller than the specified unit set to zero.
	* For example, truncating with the {@link ChronoUnit#MINUTES minutes} unit
	* will set the second-of-minute and nano-of-second field to zero.
	* <p>
	* The unit must have a {@linkplain TemporalUnit#getDuration() duration}
	* that divides into the length of a standard day without remainder.
	* This includes all supplied time units on {@link ChronoUnit} and
	* {@link ChronoUnit#DAYS DAYS}. Other units throw an exception.
	* <p>
	* The offset does not affect the calculation and will be the same in the result.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param unit the unit to truncate to, not null
	* @return an {@code OffsetDateTime} based on this date-time with the time truncated, not null
	* @throws DateTimeException if unable to truncate
	* @throws UnsupportedTemporalTypeException if the unit is not supported
	*/
	public OffsetDateTime truncatedTo(TemporalUnit unit) {
	return with(dateTime.truncatedTo(unit), offset);
	}

	//-----------------------------------------------------------------------
	/**
	* Returns a copy of this date-time with the specified amount added.
	* <p>
	* This returns an {@code OffsetDateTime}, based on this one, with the specified amount added.
	* The amount is typically {@link Period} or {@link Duration} but may be
	* any other type implementing the {@link TemporalAmount} interface.
	* <p>
	* The calculation is delegated to the amount object by calling
	* {@link TemporalAmount#addTo(Temporal)}. The amount implementation is free
	* to implement the addition in any way it wishes, however it typically
	* calls back to {@link #plus(long, TemporalUnit)}. Consult the documentation
	* of the amount implementation to determine if it can be successfully added.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param amountToAdd the amount to add, not null
	* @return an {@code OffsetDateTime} based on this date-time with the addition made, not null
	* @throws DateTimeException if the addition cannot be made
	* @throws ArithmeticException if numeric overflow occurs
	*/
	@Override
	public OffsetDateTime plus(TemporalAmount amountToAdd) {
	return (OffsetDateTime) amountToAdd.addTo(this);
	}

	/**
	* Returns a copy of this date-time with the specified amount added.
	* <p>
	* This returns an {@code OffsetDateTime}, based on this one, with the amount
	* in terms of the unit added. If it is not possible to add the amount, because the
	* unit is not supported or for some other reason, an exception is thrown.
	* <p>
	* If the field is a {@link ChronoUnit} then the addition is implemented by
	* {@link LocalDateTime#plus(long, TemporalUnit)}.
	* The offset is not part of the calculation and will be unchanged in the result.
	* <p>
	* If the field is not a {@code ChronoUnit}, then the result of this method
	* is obtained by invoking {@code TemporalUnit.addTo(Temporal, long)}
	* passing {@code this} as the argument. In this case, the unit determines
	* whether and how to perform the addition.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param amountToAdd the amount of the unit to add to the result, may be negative
	* @param unit the unit of the amount to add, not null
	* @return an {@code OffsetDateTime} based on this date-time with the specified amount added, not null
	* @throws DateTimeException if the addition cannot be made
	* @throws UnsupportedTemporalTypeException if the unit is not supported
	* @throws ArithmeticException if numeric overflow occurs
	*/
	@Override
	public OffsetDateTime plus(long amountToAdd, TemporalUnit unit) {
	if (unit instanceof ChronoUnit) {
	return with(dateTime.plus(amountToAdd, unit), offset);
	}
	return unit.addTo(this, amountToAdd);
	}

	//-----------------------------------------------------------------------
	/**
	* Returns a copy of this {@code OffsetDateTime} with the specified number of years added.
	* <p>
	* This method adds the specified amount to the years field in three steps:
	* <ol>
	* <li>Add the input years to the year field</li>
	* <li>Check if the resulting date would be invalid</li>
	* <li>Adjust the day-of-month to the last valid day if necessary</li>
	* </ol>
	* <p>
	* For example, 2008-02-29 (leap year) plus one year would result in the
	* invalid date 2009-02-29 (standard year). Instead of returning an invalid
	* result, the last valid day of the month, 2009-02-28, is selected instead.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param years the years to add, may be negative
	* @return an {@code OffsetDateTime} based on this date-time with the years added, not null
	* @throws DateTimeException if the result exceeds the supported date range
	*/
	public OffsetDateTime plusYears(long years) {
	return with(dateTime.plusYears(years), offset);
	}

	/**
	* Returns a copy of this {@code OffsetDateTime} with the specified number of months added.
	* <p>
	* This method adds the specified amount to the months field in three steps:
	* <ol>
	* <li>Add the input months to the month-of-year field</li>
	* <li>Check if the resulting date would be invalid</li>
	* <li>Adjust the day-of-month to the last valid day if necessary</li>
	* </ol>
	* <p>
	* For example, 2007-03-31 plus one month would result in the invalid date
	* 2007-04-31. Instead of returning an invalid result, the last valid day
	* of the month, 2007-04-30, is selected instead.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param months the months to add, may be negative
	* @return an {@code OffsetDateTime} based on this date-time with the months added, not null
	* @throws DateTimeException if the result exceeds the supported date range
	*/
	public OffsetDateTime plusMonths(long months) {
	return with(dateTime.plusMonths(months), offset);
	}

	/**
	* Returns a copy of this OffsetDateTime with the specified number of weeks added.
	* <p>
	* This method adds the specified amount in weeks to the days field incrementing
	* the month and year fields as necessary to ensure the result remains valid.
	* The result is only invalid if the maximum/minimum year is exceeded.
	* <p>
	* For example, 2008-12-31 plus one week would result in 2009-01-07.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param weeks the weeks to add, may be negative
	* @return an {@code OffsetDateTime} based on this date-time with the weeks added, not null
	* @throws DateTimeException if the result exceeds the supported date range
	*/
	public OffsetDateTime plusWeeks(long weeks) {
	return with(dateTime.plusWeeks(weeks), offset);
	}

	/**
	* Returns a copy of this OffsetDateTime with the specified number of days added.
	* <p>
	* This method adds the specified amount to the days field incrementing the
	* month and year fields as necessary to ensure the result remains valid.
	* The result is only invalid if the maximum/minimum year is exceeded.
	* <p>
	* For example, 2008-12-31 plus one day would result in 2009-01-01.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param days the days to add, may be negative
	* @return an {@code OffsetDateTime} based on this date-time with the days added, not null
	* @throws DateTimeException if the result exceeds the supported date range
	*/
	public OffsetDateTime plusDays(long days) {
	return with(dateTime.plusDays(days), offset);
	}

	/**
	* Returns a copy of this {@code OffsetDateTime} with the specified number of hours added.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param hours the hours to add, may be negative
	* @return an {@code OffsetDateTime} based on this date-time with the hours added, not null
	* @throws DateTimeException if the result exceeds the supported date range
	*/
	public OffsetDateTime plusHours(long hours) {
	return with(dateTime.plusHours(hours), offset);
	}

	/**
	* Returns a copy of this {@code OffsetDateTime} with the specified number of minutes added.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param minutes the minutes to add, may be negative
	* @return an {@code OffsetDateTime} based on this date-time with the minutes added, not null
	* @throws DateTimeException if the result exceeds the supported date range
	*/
	public OffsetDateTime plusMinutes(long minutes) {
	return with(dateTime.plusMinutes(minutes), offset);
	}

	/**
	* Returns a copy of this {@code OffsetDateTime} with the specified number of seconds added.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param seconds the seconds to add, may be negative
	* @return an {@code OffsetDateTime} based on this date-time with the seconds added, not null
	* @throws DateTimeException if the result exceeds the supported date range
	*/
	public OffsetDateTime plusSeconds(long seconds) {
	return with(dateTime.plusSeconds(seconds), offset);
	}

	/**
	* Returns a copy of this {@code OffsetDateTime} with the specified number of nanoseconds added.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param nanos the nanos to add, may be negative
	* @return an {@code OffsetDateTime} based on this date-time with the nanoseconds added, not null
	* @throws DateTimeException if the unit cannot be added to this type
	*/
	public OffsetDateTime plusNanos(long nanos) {
	return with(dateTime.plusNanos(nanos), offset);
	}

	//-----------------------------------------------------------------------
	/**
	* Returns a copy of this date-time with the specified amount subtracted.
	* <p>
	* This returns an {@code OffsetDateTime}, based on this one, with the specified amount subtracted.
	* The amount is typically {@link Period} or {@link Duration} but may be
	* any other type implementing the {@link TemporalAmount} interface.
	* <p>
	* The calculation is delegated to the amount object by calling
	* {@link TemporalAmount#subtractFrom(Temporal)}. The amount implementation is free
	* to implement the subtraction in any way it wishes, however it typically
	* calls back to {@link #minus(long, TemporalUnit)}. Consult the documentation
	* of the amount implementation to determine if it can be successfully subtracted.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param amountToSubtract the amount to subtract, not null
	* @return an {@code OffsetDateTime} based on this date-time with the subtraction made, not null
	* @throws DateTimeException if the subtraction cannot be made
	* @throws ArithmeticException if numeric overflow occurs
	*/
	@Override
	public OffsetDateTime minus(TemporalAmount amountToSubtract) {
	return (OffsetDateTime) amountToSubtract.subtractFrom(this);
	}

	/**
	* Returns a copy of this date-time with the specified amount subtracted.
	* <p>
	* This returns an {@code OffsetDateTime}, based on this one, with the amount
	* in terms of the unit subtracted. If it is not possible to subtract the amount,
	* because the unit is not supported or for some other reason, an exception is thrown.
	* <p>
	* This method is equivalent to {@link #plus(long, TemporalUnit)} with the amount negated.
	* See that method for a full description of how addition, and thus subtraction, works.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param amountToSubtract the amount of the unit to subtract from the result, may be negative
	* @param unit the unit of the amount to subtract, not null
	* @return an {@code OffsetDateTime} based on this date-time with the specified amount subtracted, not null
	* @throws DateTimeException if the subtraction cannot be made
	* @throws UnsupportedTemporalTypeException if the unit is not supported
	* @throws ArithmeticException if numeric overflow occurs
	*/
	@Override
	public OffsetDateTime minus(long amountToSubtract, TemporalUnit unit) {
	return (amountToSubtract == Long.MIN_VALUE ? plus(Long.MAX_VALUE, unit).plus(1, unit) : plus(-amountToSubtract, unit));
	}

	//-----------------------------------------------------------------------
	/**
	* Returns a copy of this {@code OffsetDateTime} with the specified number of years subtracted.
	* <p>
	* This method subtracts the specified amount from the years field in three steps:
	* <ol>
	* <li>Subtract the input years from the year field</li>
	* <li>Check if the resulting date would be invalid</li>
	* <li>Adjust the day-of-month to the last valid day if necessary</li>
	* </ol>
	* <p>
	* For example, 2008-02-29 (leap year) minus one year would result in the
	* invalid date 2009-02-29 (standard year). Instead of returning an invalid
	* result, the last valid day of the month, 2009-02-28, is selected instead.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param years the years to subtract, may be negative
	* @return an {@code OffsetDateTime} based on this date-time with the years subtracted, not null
	* @throws DateTimeException if the result exceeds the supported date range
	*/
	public OffsetDateTime minusYears(long years) {
	return (years == Long.MIN_VALUE ? plusYears(Long.MAX_VALUE).plusYears(1) : plusYears(-years));
	}

	/**
	* Returns a copy of this {@code OffsetDateTime} with the specified number of months subtracted.
	* <p>
	* This method subtracts the specified amount from the months field in three steps:
	* <ol>
	* <li>Subtract the input months from the month-of-year field</li>
	* <li>Check if the resulting date would be invalid</li>
	* <li>Adjust the day-of-month to the last valid day if necessary</li>
	* </ol>
	* <p>
	* For example, 2007-03-31 minus one month would result in the invalid date
	* 2007-04-31. Instead of returning an invalid result, the last valid day
	* of the month, 2007-04-30, is selected instead.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param months the months to subtract, may be negative
	* @return an {@code OffsetDateTime} based on this date-time with the months subtracted, not null
	* @throws DateTimeException if the result exceeds the supported date range
	*/
	public OffsetDateTime minusMonths(long months) {
	return (months == Long.MIN_VALUE ? plusMonths(Long.MAX_VALUE).plusMonths(1) : plusMonths(-months));
	}

	/**
	* Returns a copy of this {@code OffsetDateTime} with the specified number of weeks subtracted.
	* <p>
	* This method subtracts the specified amount in weeks from the days field decrementing
	* the month and year fields as necessary to ensure the result remains valid.
	* The result is only invalid if the maximum/minimum year is exceeded.
	* <p>
	* For example, 2008-12-31 minus one week would result in 2009-01-07.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param weeks the weeks to subtract, may be negative
	* @return an {@code OffsetDateTime} based on this date-time with the weeks subtracted, not null
	* @throws DateTimeException if the result exceeds the supported date range
	*/
	public OffsetDateTime minusWeeks(long weeks) {
	return (weeks == Long.MIN_VALUE ? plusWeeks(Long.MAX_VALUE).plusWeeks(1) : plusWeeks(-weeks));
	}

	/**
	* Returns a copy of this {@code OffsetDateTime} with the specified number of days subtracted.
	* <p>
	* This method subtracts the specified amount from the days field decrementing the
	* month and year fields as necessary to ensure the result remains valid.
	* The result is only invalid if the maximum/minimum year is exceeded.
	* <p>
	* For example, 2008-12-31 minus one day would result in 2009-01-01.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param days the days to subtract, may be negative
	* @return an {@code OffsetDateTime} based on this date-time with the days subtracted, not null
	* @throws DateTimeException if the result exceeds the supported date range
	*/
	public OffsetDateTime minusDays(long days) {
	return (days == Long.MIN_VALUE ? plusDays(Long.MAX_VALUE).plusDays(1) : plusDays(-days));
	}

	/**
	* Returns a copy of this {@code OffsetDateTime} with the specified number of hours subtracted.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param hours the hours to subtract, may be negative
	* @return an {@code OffsetDateTime} based on this date-time with the hours subtracted, not null
	* @throws DateTimeException if the result exceeds the supported date range
	*/
	public OffsetDateTime minusHours(long hours) {
	return (hours == Long.MIN_VALUE ? plusHours(Long.MAX_VALUE).plusHours(1) : plusHours(-hours));
	}

	/**
	* Returns a copy of this {@code OffsetDateTime} with the specified number of minutes subtracted.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param minutes the minutes to subtract, may be negative
	* @return an {@code OffsetDateTime} based on this date-time with the minutes subtracted, not null
	* @throws DateTimeException if the result exceeds the supported date range
	*/
	public OffsetDateTime minusMinutes(long minutes) {
	return (minutes == Long.MIN_VALUE ? plusMinutes(Long.MAX_VALUE).plusMinutes(1) : plusMinutes(-minutes));
	}

	/**
	* Returns a copy of this {@code OffsetDateTime} with the specified number of seconds subtracted.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param seconds the seconds to subtract, may be negative
	* @return an {@code OffsetDateTime} based on this date-time with the seconds subtracted, not null
	* @throws DateTimeException if the result exceeds the supported date range
	*/
	public OffsetDateTime minusSeconds(long seconds) {
	return (seconds == Long.MIN_VALUE ? plusSeconds(Long.MAX_VALUE).plusSeconds(1) : plusSeconds(-seconds));
	}

	/**
	* Returns a copy of this {@code OffsetDateTime} with the specified number of nanoseconds subtracted.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param nanos the nanos to subtract, may be negative
	* @return an {@code OffsetDateTime} based on this date-time with the nanoseconds subtracted, not null
	* @throws DateTimeException if the result exceeds the supported date range
	*/
	public OffsetDateTime minusNanos(long nanos) {
	return (nanos == Long.MIN_VALUE ? plusNanos(Long.MAX_VALUE).plusNanos(1) : plusNanos(-nanos));
	}

	//-----------------------------------------------------------------------
	/**
	* Queries this date-time using the specified query.
	* <p>
	* This queries this date-time using the specified query strategy object.
	* The {@code TemporalQuery} object defines the logic to be used to
	* obtain the result. Read the documentation of the query to understand
	* what the result of this method will be.
	* <p>
	* The result of this method is obtained by invoking the
	* {@link TemporalQuery#queryFrom(TemporalAccessor)} method on the
	* specified query passing {@code this} as the argument.
	*
	* @param <R> the type of the result
	* @param query the query to invoke, not null
	* @return the query result, null may be returned (defined by the query)
	* @throws DateTimeException if unable to query (defined by the query)
	* @throws ArithmeticException if numeric overflow occurs (defined by the query)
	*/
	@SuppressWarnings("unchecked")
	@Override
	public <R> R query(TemporalQuery<R> query) {
	if (query == TemporalQueries.offset() \|\| query == TemporalQueries.zone()) {
	return (R) getOffset();
	} else if (query == TemporalQueries.zoneId()) {
	return null;
	} else if (query == TemporalQueries.localDate()) {
	return (R) toLocalDate();
	} else if (query == TemporalQueries.localTime()) {
	return (R) toLocalTime();
	} else if (query == TemporalQueries.chronology()) {
	return (R) IsoChronology.INSTANCE;
	} else if (query == TemporalQueries.precision()) {
	return (R) NANOS;
	}
	// inline TemporalAccessor.super.query(query) as an optimization
	// non-JDK classes are not permitted to make this optimization
	return query.queryFrom(this);
	}

	/**
	* Adjusts the specified temporal object to have the same offset, date
	* and time as this object.
	* <p>
	* This returns a temporal object of the same observable type as the input
	* with the offset, date and time changed to be the same as this.
	* <p>
	* The adjustment is equivalent to using {@link Temporal#with(TemporalField, long)}
	* three times, passing {@link ChronoField#EPOCH_DAY},
	* {@link ChronoField#NANO_OF_DAY} and {@link ChronoField#OFFSET_SECONDS} as the fields.
	* <p>
	* In most cases, it is clearer to reverse the calling pattern by using
	* {@link Temporal#with(TemporalAdjuster)}:
	* <pre>
	* // these two lines are equivalent, but the second approach is recommended
	* temporal = thisOffsetDateTime.adjustInto(temporal);
	* temporal = temporal.with(thisOffsetDateTime);
	* </pre>
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param temporal the target object to be adjusted, not null
	* @return the adjusted object, not null
	* @throws DateTimeException if unable to make the adjustment
	* @throws ArithmeticException if numeric overflow occurs
	*/
	@Override
	public Temporal adjustInto(Temporal temporal) {
	// OffsetDateTime is treated as three separate fields, not an instant
	// this produces the most consistent set of results overall
	// the offset is set after the date and time, as it is typically a small
	// tweak to the result, with ZonedDateTime frequently ignoring the offset
	return temporal
	.with(EPOCH_DAY, toLocalDate().toEpochDay())
	.with(NANO_OF_DAY, toLocalTime().toNanoOfDay())
	.with(OFFSET_SECONDS, getOffset().getTotalSeconds());
	}

	/**
	* Calculates the amount of time until another date-time in terms of the specified unit.
	* <p>
	* This calculates the amount of time between two {@code OffsetDateTime}
	* objects in terms of a single {@code TemporalUnit}.
	* The start and end points are {@code this} and the specified date-time.
	* The result will be negative if the end is before the start.
	* For example, the amount in days between two date-times can be calculated
	* using {@code startDateTime.until(endDateTime, DAYS)}.
	* <p>
	* The {@code Temporal} passed to this method is converted to a
	* {@code OffsetDateTime} using {@link #from(TemporalAccessor)}.
	* If the offset differs between the two date-times, the specified
	* end date-time is normalized to have the same offset as this date-time.
	* <p>
	* The calculation returns a whole number, representing the number of
	* complete units between the two date-times.
	* For example, the amount in months between 2012-06-15T00:00Z and 2012-08-14T23:59Z
	* will only be one month as it is one minute short of two months.
	* <p>
	* There are two equivalent ways of using this method.
	* The first is to invoke this method.
	* The second is to use {@link TemporalUnit#between(Temporal, Temporal)}:
	* <pre>
	* // these two lines are equivalent
	* amount = start.until(end, MONTHS);
	* amount = MONTHS.between(start, end);
	* </pre>
	* The choice should be made based on which makes the code more readable.
	* <p>
	* The calculation is implemented in this method for {@link ChronoUnit}.
	* The units {@code NANOS}, {@code MICROS}, {@code MILLIS}, {@code SECONDS},
	* {@code MINUTES}, {@code HOURS} and {@code HALF_DAYS}, {@code DAYS},
	* {@code WEEKS}, {@code MONTHS}, {@code YEARS}, {@code DECADES},
	* {@code CENTURIES}, {@code MILLENNIA} and {@code ERAS} are supported.
	* Other {@code ChronoUnit} values will throw an exception.
	* <p>
	* If the unit is not a {@code ChronoUnit}, then the result of this method
	* is obtained by invoking {@code TemporalUnit.between(Temporal, Temporal)}
	* passing {@code this} as the first argument and the converted input temporal
	* as the second argument.
	* <p>
	* This instance is immutable and unaffected by this method call.
	*
	* @param endExclusive the end date, exclusive, which is converted to an {@code OffsetDateTime}, not null
	* @param unit the unit to measure the amount in, not null
	* @return the amount of time between this date-time and the end date-time
	* @throws DateTimeException if the amount cannot be calculated, or the end
	* temporal cannot be converted to an {@code OffsetDateTime}
	* @throws UnsupportedTemporalTypeException if the unit is not supported
	* @throws ArithmeticException if numeric overflow occurs
	*/
	@Override
	public long until(Temporal endExclusive, TemporalUnit unit) {
	OffsetDateTime end = OffsetDateTime.from(endExclusive);
	if (unit instanceof ChronoUnit) {
	end = end.withOffsetSameInstant(offset);
	return dateTime.until(end.dateTime, unit);
	}
	return unit.between(this, end);
	}

	/**
	* Formats this date-time using the specified formatter.
	* <p>
	* This date-time will be passed to the formatter to produce a string.
	*
	* @param formatter the formatter to use, not null
	* @return the formatted date-time string, not null
	* @throws DateTimeException if an error occurs during printing
	*/
	public String format(DateTimeFormatter formatter) {
	Objects.requireNonNull(formatter, "formatter");
	return formatter.format(this);
	}

	//-----------------------------------------------------------------------
	/**
	* Combines this date-time with a time-zone to create a {@code ZonedDateTime}
	* ensuring that the result has the same instant.
	* <p>
	* This returns a {@code ZonedDateTime} formed from this date-time and the specified time-zone.
	* This conversion will ignore the visible local date-time and use the underlying instant instead.
	* This avoids any problems with local time-line gaps or overlaps.
	* The result might have different values for fields such as hour, minute an even day.
	* <p>
	* To attempt to retain the values of the fields, use {@link #atZoneSimilarLocal(ZoneId)}.
	* To use the offset as the zone ID, use {@link #toZonedDateTime()}.
	*
	* @param zone the time-zone to use, not null
	* @return the zoned date-time formed from this date-time, not null
	*/
	public ZonedDateTime atZoneSameInstant(ZoneId zone) {
	return ZonedDateTime.ofInstant(dateTime, offset, zone);
	}

	/**
	* Combines this date-time with a time-zone to create a {@code ZonedDateTime}
	* trying to keep the same local date and time.
	* <p>
	* This returns a {@code ZonedDateTime} formed from this date-time and the specified time-zone.
	* Where possible, the result will have the same local date-time as this object.
	* <p>
	* Time-zone rules, such as daylight savings, mean that not every time on the
	* local time-line exists. If the local date-time is in a gap or overlap according to
	* the rules then a resolver is used to determine the resultant local time and offset.
	* This method uses {@link ZonedDateTime#ofLocal(LocalDateTime, ZoneId, ZoneOffset)}
	* to retain the offset from this instance if possible.
	* <p>
	* Finer control over gaps and overlaps is available in two ways.
	* If you simply want to use the later offset at overlaps then call
	* {@link ZonedDateTime#withLaterOffsetAtOverlap()} immediately after this method.
	* <p>
	* To create a zoned date-time at the same instant irrespective of the local time-line,
	* use {@link #atZoneSameInstant(ZoneId)}.
	* To use the offset as the zone ID, use {@link #toZonedDateTime()}.
	*
	* @param zone the time-zone to use, not null
	* @return the zoned date-time formed from this date and the earliest valid time for the zone, not null
	*/
	public ZonedDateTime atZoneSimilarLocal(ZoneId zone) {
	return ZonedDateTime.ofLocal(dateTime, zone, offset);
	}

	//-----------------------------------------------------------------------
	/**
	* Converts this date-time to an {@code OffsetTime}.
	* <p>
	* This returns an offset time with the same local time and offset.
	*
	* @return an OffsetTime representing the time and offset, not null
	*/
	public OffsetTime toOffsetTime() {
	return OffsetTime.of(dateTime.toLocalTime(), offset);
	}

	/**
	* Converts this date-time to a {@code ZonedDateTime} using the offset as the zone ID.
	* <p>
	* This creates the simplest possible {@code ZonedDateTime} using the offset
	* as the zone ID.
	* <p>
	* To control the time-zone used, see {@link #atZoneSameInstant(ZoneId)} and
	* {@link #atZoneSimilarLocal(ZoneId)}.
	*
	* @return a zoned date-time representing the same local date-time and offset, not null
	*/
	public ZonedDateTime toZonedDateTime() {
	return ZonedDateTime.of(dateTime, offset);
	}

	/**
	* Converts this date-time to an {@code Instant}.
	* <p>
	* This returns an {@code Instant} representing the same point on the
	* time-line as this date-time.
	*
	* @return an {@code Instant} representing the same instant, not null
	*/
	public Instant toInstant() {
	return dateTime.toInstant(offset);
	}

	/**
	* Converts this date-time to the number of seconds from the epoch of 1970-01-01T00:00:00Z.
	* <p>
	* This allows this date-time to be converted to a value of the
	* {@link ChronoField#INSTANT_SECONDS epoch-seconds} field. This is primarily
	* intended for low-level conversions rather than general application usage.
	*
	* @return the number of seconds from the epoch of 1970-01-01T00:00:00Z
	*/
	public long toEpochSecond() {
	return dateTime.toEpochSecond(offset);
	}

	//-----------------------------------------------------------------------
	/**
	* Compares this date-time to another date-time.
	* <p>
	* The comparison is based on the instant then on the local date-time.
	* It is "consistent with equals", as defined by {@link Comparable}.
	* <p>
	* For example, the following is the comparator order:
	* <ol>
	* <li>{@code 2008-12-03T10:30+01:00}</li>
	* <li>{@code 2008-12-03T11:00+01:00}</li>
	* <li>{@code 2008-12-03T12:00+02:00}</li>
	* <li>{@code 2008-12-03T11:30+01:00}</li>
	* <li>{@code 2008-12-03T12:00+01:00}</li>
	* <li>{@code 2008-12-03T12:30+01:00}</li>
	* </ol>
	* Values #2 and #3 represent the same instant on the time-line.
	* When two values represent the same instant, the local date-time is compared
	* to distinguish them. This step is needed to make the ordering
	* consistent with {@code equals()}.
	*
	* @param other the other date-time to compare to, not null
	* @return the comparator value, negative if less, positive if greater
	*/
	@Override
	public int compareTo(OffsetDateTime other) {
	int cmp = compareInstant(this, other);
	if (cmp == 0) {
	cmp = toLocalDateTime().compareTo(other.toLocalDateTime());
	}
	return cmp;
	}

	//-----------------------------------------------------------------------
	/**
	* Checks if the instant of this date-time is after that of the specified date-time.
	* <p>
	* This method differs from the comparison in {@link #compareTo} and {@link #equals} in that it
	* only compares the instant of the date-time. This is equivalent to using
	* {@code dateTime1.toInstant().isAfter(dateTime2.toInstant());}.
	*
	* @param other the other date-time to compare to, not null
	* @return true if this is after the instant of the specified date-time
	*/
	public boolean isAfter(OffsetDateTime other) {
	long thisEpochSec = toEpochSecond();
	long otherEpochSec = other.toEpochSecond();
	return thisEpochSec > otherEpochSec \|\|
	(thisEpochSec == otherEpochSec && toLocalTime().getNano() > other.toLocalTime().getNano());
	}

	/**
	* Checks if the instant of this date-time is before that of the specified date-time.
	* <p>
	* This method differs from the comparison in {@link #compareTo} in that it
	* only compares the instant of the date-time. This is equivalent to using
	* {@code dateTime1.toInstant().isBefore(dateTime2.toInstant());}.
	*
	* @param other the other date-time to compare to, not null
	* @return true if this is before the instant of the specified date-time
	*/
	public boolean isBefore(OffsetDateTime other) {
	long thisEpochSec = toEpochSecond();
	long otherEpochSec = other.toEpochSecond();
	return thisEpochSec < otherEpochSec \|\|
	(thisEpochSec == otherEpochSec && toLocalTime().getNano() < other.toLocalTime().getNano());
	}

	/**
	* Checks if the instant of this date-time is equal to that of the specified date-time.
	* <p>
	* This method differs from the comparison in {@link #compareTo} and {@link #equals}
	* in that it only compares the instant of the date-time. This is equivalent to using
	* {@code dateTime1.toInstant().equals(dateTime2.toInstant());}.
	*
	* @param other the other date-time to compare to, not null
	* @return true if the instant equals the instant of the specified date-time
	*/
	public boolean isEqual(OffsetDateTime other) {
	return toEpochSecond() == other.toEpochSecond() &&
	toLocalTime().getNano() == other.toLocalTime().getNano();
	}

	//-----------------------------------------------------------------------
	/**
	* Checks if this date-time is equal to another date-time.
	* <p>
	* The comparison is based on the local date-time and the offset.
	* To compare for the same instant on the time-line, use {@link #isEqual}.
	* Only objects of type {@code OffsetDateTime} are compared, other types return false.
	*
	* @param obj the object to check, null returns false
	* @return true if this is equal to the other date-time
	*/
	@Override
	public boolean equals(Object obj) {
	if (this == obj) {
	return true;
	}
	if (obj instanceof OffsetDateTime) {
	OffsetDateTime other = (OffsetDateTime) obj;
	return dateTime.equals(other.dateTime) && offset.equals(other.offset);
	}
	return false;
	}

	/**
	* A hash code for this date-time.
	*
	* @return a suitable hash code
	*/
	@Override
	public int hashCode() {
	return dateTime.hashCode() ^ offset.hashCode();
	}

	//-----------------------------------------------------------------------
	/**
	* Outputs this date-time as a {@code String}, such as {@code 2007-12-03T10:15:30+01:00}.
	* <p>
	* The output will be one of the following ISO-8601 formats:
	* <ul>
	* <li>{@code uuuu-MM-dd'T'HH:mmXXXXX}</li>
	* <li>{@code uuuu-MM-dd'T'HH:mm:ssXXXXX}</li>
	* <li>{@code uuuu-MM-dd'T'HH:mm:ss.SSSXXXXX}</li>
	* <li>{@code uuuu-MM-dd'T'HH:mm:ss.SSSSSSXXXXX}</li>
	* <li>{@code uuuu-MM-dd'T'HH:mm:ss.SSSSSSSSSXXXXX}</li>
	* </ul>
	* The format used will be the shortest that outputs the full value of
	* the time where the omitted parts are implied to be zero.
	*
	* @return a string representation of this date-time, not null
	*/
	@Override
	public String toString() {
	return dateTime.toString() + offset.toString();
	}

	//-----------------------------------------------------------------------
	/**
	* Writes the object using a
	* <a href="../../serialized-form.html#java.time.Ser">dedicated serialized form</a>.
	* @serialData
	* <pre>
	* out.writeByte(10); // identifies an OffsetDateTime
	* // the <a href="../../serialized-form.html#java.time.LocalDateTime">datetime</a> excluding the one byte header
	* // the <a href="../../serialized-form.html#java.time.ZoneOffset">offset</a> excluding the one byte header
	* </pre>
	*
	* @return the instance of {@code Ser}, not null
	*/
	private Object writeReplace() {
	return new Ser(Ser.OFFSET_DATE_TIME_TYPE, this);
	}

	/**
	* Defend against malicious streams.
	*
	* @param s the stream to read
	* @throws InvalidObjectException always
	*/
	private void readObject(ObjectInputStream s) throws InvalidObjectException {
	throw new InvalidObjectException("Deserialization via serialization delegate");
	}

	void writeExternal(ObjectOutput out) throws IOException {
	dateTime.writeExternal(out);
	offset.writeExternal(out);
	}

	static OffsetDateTime readExternal(ObjectInput in) throws IOException, ClassNotFoundException {
	LocalDateTime dateTime = LocalDateTime.readExternal(in);
	ZoneOffset offset = ZoneOffset.readExternal(in);
	return OffsetDateTime.of(dateTime, offset);
	}

	}

Back to index...