Back to index...
/*
 * Copyright (c) 2000, 2004, Oracle and/or its affiliates. All rights reserved.
 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 *
 * This code is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 only, as
 * published by the Free Software Foundation.  Oracle designates this
 * particular file as subject to the "Classpath" exception as provided
 * by Oracle in the LICENSE file that accompanied this code.
 *
 * This code is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * version 2 for more details (a copy is included in the LICENSE file that
 * accompanied this code).
 *
 * You should have received a copy of the GNU General Public License version
 * 2 along with this work; if not, write to the Free Software Foundation,
 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
 * or visit www.oracle.com if you need additional information or have any
 * questions.
 */
package javax.print.attribute.standard;
import javax.print.attribute.Attribute;
import javax.print.attribute.IntegerSyntax;
import javax.print.attribute.DocAttribute;
import javax.print.attribute.PrintRequestAttribute;
import javax.print.attribute.PrintJobAttribute;
/**
 * Class NumberUp is an integer valued printing attribute class that specifies
 * the number of print-stream pages to impose upon a single side of an
 * instance of a selected medium. That is, if the NumberUp value is <I>n,</I>
 * the printer must place <I>n</I> print-stream pages on a single side of
 * an instance of the
 * selected medium. To accomplish this, the printer may add some sort of
 * translation, scaling, or rotation. This attribute primarily controls the
 * translation, scaling and rotation of print-stream pages.
 * <P>
 * The effect of a NumberUp attribute on a multidoc print job (a job with
 * multiple documents) depends on whether all the docs have the same number up
 * values specified or whether different docs have different number up values
 * specified, and on the (perhaps defaulted) value of the {@link
 * MultipleDocumentHandling MultipleDocumentHandling} attribute.
 * <UL>
 * <LI>
 * If all the docs have the same number up value <I>n</I> specified, then any
 * value of {@link MultipleDocumentHandling MultipleDocumentHandling} makes
 * sense, and the printer's processing depends on the {@link
 * MultipleDocumentHandling MultipleDocumentHandling} value:
 * <UL>
 * <LI>
 * SINGLE_DOCUMENT -- All the input docs will be combined together into one
 * output document. Each media impression will consist of <I>n</I>m
 *  print-stream pages from the output document.
 * <P>
 * <LI>
 * SINGLE_DOCUMENT_NEW_SHEET -- All the input docs will be combined together
 * into one output document. Each media impression will consist of <I>n</I>
 * print-stream pages from the output document. However, the first impression of
 * each input doc will always start on a new media sheet; this means the last
 * impression of an input doc may have fewer than <I>n</I> print-stream pages
 *  on it.
 * <P>
 * <LI>
 * SEPARATE_DOCUMENTS_UNCOLLATED_COPIES -- The input docs will remain separate.
 * Each media impression will consist of <I>n</I> print-stream pages from the
 * input doc. Since the input docs are separate, the first impression of each
 * input doc will always start on a new media sheet; this means the last
 * impression of an input doc may have fewer than <I>n</I> print-stream pages on
 * it.
 * <P>
 * <LI>
 * SEPARATE_DOCUMENTS_COLLATED_COPIES -- The input docs will remain separate.
 * Each media impression will consist of <I>n</I> print-stream pages from the
 * input doc. Since the input docs are separate, the first impression of each
 * input doc will always start on a new media sheet; this means the last
 * impression of an input doc may have fewer than <I>n</I> print-stream pages
 * on it.
 * </UL>
 * <UL>
 * <LI>
 * SINGLE_DOCUMENT -- All the input docs will be combined together into one
 * output document. Each media impression will consist of <I>n<SUB>i</SUB></I>
 * print-stream pages from the output document, where <I>i</I> is the number of
 * the input doc corresponding to that point in the output document. When the
 * next input doc has a different number up value from the previous input doc,
 * the first print-stream page of the next input doc goes at the start of the
 * next media impression, possibly leaving fewer than the full number of
 * print-stream pages on the previous media impression.
 * <P>
 * <LI>
 * SINGLE_DOCUMENT_NEW_SHEET -- All the input docs will be combined together
 * into one output document. Each media impression will consist of <I>n</I>
 * print-stream pages from the output document. However, the first impression of
 * each input doc will always start on a new media sheet; this means the last
 * impression of an input doc may have fewer than <I>n</I> print-stream pages
 * on it.
 * <P>
 * <LI>
 * SEPARATE_DOCUMENTS_UNCOLLATED_COPIES -- The input docs will remain separate.
 * For input doc <I>i,</I> each media impression will consist of
 * <I>n<SUB>i</SUB></I> print-stream pages from the input doc. Since the input
 * docs are separate, the first impression of each input doc will always start
 * on a new media sheet; this means the last impression of an input doc may have
 * fewer than <I>n<SUB>i</SUB></I> print-stream pages on it.
 * <P>
 * <LI>
 * SEPARATE_DOCUMENTS_COLLATED_COPIES -- The input docs will remain separate.
 * For input doc <I>i,</I> each media impression will consist of
 * <I>n<SUB>i</SUB></I> print-stream pages from the input doc. Since the input
 * docs are separate, the first impression of each input doc will always start
 * on a new media sheet; this means the last impression of an input doc may
 * have fewer than <I>n<SUB>i</SUB></I> print-stream pages on it.
 * </UL>
 * </UL>
 * <B>IPP Compatibility:</B> The integer value gives the IPP integer value.
 * The category name returned by <CODE>getName()</CODE> gives the IPP
 * attribute name.
 * <P>
 *
 * @author  Alan Kaminsky
 */
public final class NumberUp extends IntegerSyntax
    implements DocAttribute, PrintRequestAttribute, PrintJobAttribute {
    private static final long serialVersionUID = -3040436486786527811L;
    /**
     * Construct a new number up attribute with the given integer value.
     *
     * @param  value  Integer value.
     *
     * @exception  IllegalArgumentException
     *   (Unchecked exception) Thrown if <CODE>value</CODE> is less than 1.
     */
    public NumberUp(int value) {
        super (value, 1, Integer.MAX_VALUE);
    }
    /**
     * Returns whether this number up attribute is equivalent to the passed in
     * object. To be equivalent, all of the following conditions must be true:
     * <OL TYPE=1>
     * <LI>
     * <CODE>object</CODE> is not null.
     * <LI>
     * <CODE>object</CODE> is an instance of class NumberUp.
     * <LI>
     * This number up attribute's value and <CODE>object</CODE>'s value are
     * equal.
     * </OL>
     *
     * @param  object  Object to compare to.
     *
     * @return  True if <CODE>object</CODE> is equivalent to this number up
     *          attribute, false otherwise.
     */
    public boolean equals(Object object) {
        return (super.equals(object) && object instanceof NumberUp);
    }
    /**
     * Get the printing attribute class which is to be used as the "category"
     * for this printing attribute value.
     * <P>
     * For class NumberUp, the category is class NumberUp itself.
     *
     * @return  Printing attribute class (category), an instance of class
     *          {@link java.lang.Class java.lang.Class}.
     */
    public final Class<? extends Attribute> getCategory() {
        return NumberUp.class;
    }
    /**
     * Get the name of the category of which this attribute value is an
     * instance.
     * <P>
     * For class NumberUp, the category name is <CODE>"number-up"</CODE>.
     *
     * @return  Attribute category name.
     */
    public final String getName() {
        return "number-up";
    }
}
Back to index...